The SONOFF SAWF-08P is a Matter device (Vendor 0x1321, Product 0x00F2) with 2 endpoints.
SAWF-08P
Vendor ID:
4897
Product ID:
242
Seen:
374 times
No Binding
This device cannot directly control other devices. It can only be controlled by a hub or controller.
Wifi
CSA Certification:
What This Device Can Do
11% of features
| Controls | ||
|---|---|---|
| 💡 On/Off control | v1.0 | ✕ |
| 🔆 Brightness dimming | v1.1 | ✕ |
| 🎨 Color temperature | v1.1 | ✕ |
| 🌈 Full color (RGB) | v1.1 | ✕ |
| 🌀 Fan speed control | v1.1 | ✕ |
| 🪟 Blinds/shades control | v1.0 | ✕ |
| 🔒 Lock/unlock | v1.0 | ✕ |
| 🌡️ Temperature setpoint | v1.0 | ✕ |
| 💧 Pump control | v1.0 | ✕ |
| 🚰 Valve control | v1.3 | ✕ |
| Sensors | ||
|---|---|---|
| 🌡️ Temperature sensor | v1.0 | ✓ |
| 💧 Humidity sensor | v1.0 | ✓ |
| 🌿 Air quality sensor | v1.2 | ✓ |
| 👁️ Occupancy/motion sensor | v1.1 | ✕ |
| ☀️ Light level sensor | v1.0 | ✕ |
| 🚪 Open/close sensor | v1.0 | ✕ |
| 📊 Pressure sensor | v1.0 | ✕ |
| 🌊 Flow sensor | v1.0 | ✕ |
| 🔥 Smoke detector | v1.2 | ✕ |
| ⚠️ Carbon monoxide detector | v1.2 | ✕ |
| Automation & Scenes | ||
|---|---|---|
| 🎬 Scenes & presets | v1.3 | ✕ |
| 👥 Group control | v1.1 | ✕ |
| 🔗 Device-to-device control | v1.0 | ✕ |
| ▶️ Automation actions | v1.0 | ✕ |
| 🎚️ Operating modes | v1.0 | ✕ |
| ⏰ Scheduling | v1.0 | ✕ |
| 👁️ Responds to occupancy | v1.1 | ✕ |
| Info & Monitoring | ||
|---|---|---|
| 📊 Device diagnostics | v1.0 | ✓ |
| ⬇️ Firmware updates | v1.0 | ✓ |
| ⚡ Energy monitoring | v1.3 | ✕ |
| 🔋 Battery status | v1.0 | ✕ |
| Comfort & Climate | ||
|---|---|---|
| 🔥 Heating | v1.0 | ✕ |
| ❄️ Cooling | v1.0 | ✕ |
| 🔄 Auto heat/cool | v1.0 | ✕ |
| 📌 Temperature presets | v1.0 | ✕ |
| 💧 Humidity control | v1.1 | ✕ |
| 🌿 Air purification | v1.2 | ✕ |
| Security | ||
|---|---|---|
| 🔢 PIN code access | v1.0 | ✕ |
| 💳 RFID/card access | v1.0 | ✕ |
| 👤 User management | v1.0 | ✕ |
| Media & Entertainment | ||
|---|---|---|
| ▶️ Media playback | v1.0 | ✕ |
| 🔊 Volume control | v1.0 | ✕ |
| 📺 Channel selection | v1.0 | ✕ |
| 🔌 Input selection | v1.0 | ✕ |
| 📲 Casting/streaming | v1.0 | ✕ |
Standout:
Air quality sensor
Not available:
Device-to-device control, Energy monitoring
Setup & Reset Info
▼
Setup:
Power Cycle
Reset:
Standard
Initial Setup:
5
Additional Steps:
5
Technical Details For developers
▼Device Compatibility
Can provide data to: These devices have client clusters that can read from or control this device's server clusters
Temperature Measurement (5 devices)
Frequently Paired With Found in 8 installations
These devices are commonly found together in the same smart home setup based on anonymous telemetry data.
KLIPPBOK water leak sensor
IKEA of Sweden
5
shared
62.5%
of installs
MYGGBETT door/window sensor
IKEA of Sweden
4
shared
50%
of installs
BILRESA dual button
IKEA of Sweden
4
shared
50%
of installs
MYGGSPRAY wrlss mtn sensor
IKEA of Sweden
4
shared
50%
of installs
ALPSTUGA air quality monitor
IKEA of Sweden
3
shared
37.5%
of installs
GRILLPLATS plug
IKEA of Sweden
3
shared
37.5%
of installs
Matter On/off Plug-in Unit
Quectel
2
shared
25%
of installs
ITIUS E27 RGB+CCT
ITIUS
2
shared
25%
of installs
Endpoints by Version
Hardware: v1.0
SW: v1.0
Latest Seen
2 endpoints
Endpoint 0
Device Types
Server Clusters (hover for details)✓ Rich data
Client Clusters (hover for details)
Endpoint 1
Device Types
Server Clusters (hover for details)✓ Rich data
Known Versions
| Hardware Version | Software Version | Count | First Seen | Last Seen |
|---|---|---|---|---|
| v1.0 | v1.0 | 374 | 2026-01-14 19:34:31 | 2026-09-23 21:55:00 |