The Nanoleaf Nanoleaf Indoor Lights is a Matter device (Vendor 0x115A, Product 0x0048) with 8 endpoints.

Last updated 14 Jun 2026

Nanoleaf Indoor Lights

★ ★ ★ ☆ ☆ (60%)

Nanoleaf

Vendor ID: 4442

Product ID: 72

Seen: 222 times

Supports Binding ℹ️ Wifi

CSA Certification:

Certified Dec 5, 2023 CSA23K45MAT42546-24 v1.5.0

Links: 🛟 Support

What This Device Can Do

Lighting

★ ★ ★ ☆ ☆ 67% of features

Controls
▶ 💡 On/Off control	v1.0	✓
On/Off What you can do: ✓ Turn off the device ✓ Turn on the device ✓ Switch between on and off ✓ Turn off with visual effect ✓ On with recall global scene ✓ Turn on for a set duration Information available: ✓ Current power state (on/off) ✓ Global scene control ✓ On time ✓ Off wait time ✓ Power-on behavior setting Enabled features: Lighting
▶ 🔆 Brightness dimming	v1.1	✓
Level Control What you can do: ✓ Set brightness to a specific level ✓ Gradually increase or decrease brightness ✓ Adjust brightness by small increments ✓ Stop ongoing brightness change ✓ Set brightness (turns on if off) ✓ Move with on off ✓ Step with on off ✓ Stop with on off ✕ Move to closest frequency optional Information available: ✓ Current brightness level (0-254) ✓ Remaining time ✓ Minimum supported brightness ✓ Maximum supported brightness ✕ Current frequency optional ✕ Min frequency optional ✕ Max frequency optional ✓ Options ✓ On off transition time ✓ On level ✕ On transition time optional ✕ Off transition time optional ✕ Default move rate optional ✓ Start up current level Enabled features: OnOff Lighting
▶ 🎨 Color temperature	v1.1	✓
Color Control What you can do: ✓ Move to hue ✓ Move hue ✓ Step hue ✓ Move to saturation ✓ Move saturation ✓ Step saturation ✓ Move to hue and saturation ✓ Move to color ✓ Move color ✓ Step color ✓ Set color temperature (warm to cool) ✕ Enhanced move to hue optional ✕ Enhanced move hue optional ✕ Enhanced step hue optional ✕ Enhanced move to hue and saturation optional ✕ Color loop set optional ✓ Stop move step ✓ Gradually shift color temperature ✓ Adjust temperature by small steps Information available: ✓ Current hue ✓ Current saturation ✓ Remaining time ✓ Current x ✓ Current y ✕ Drift compensation optional ✕ Compensation text optional ✓ Current color temperature ✓ Color mode ✓ Options ✓ Number of primaries ✕ Primary1x optional ✕ Primary1y optional ✕ Primary1intensity optional ✕ Primary2x optional ✕ Primary2y optional ✕ Primary2intensity optional ✕ Primary3x optional ✕ Primary3y optional ✕ Primary3intensity optional ✕ Primary4x optional ✕ Primary4y optional ✕ Primary4intensity optional ✕ Primary5x optional ✕ Primary5y optional ✕ Primary5intensity optional ✕ Primary6x optional ✕ Primary6y optional ✕ Primary6intensity optional ✕ White point x optional ✕ White point y optional ✕ Color point rx optional ✕ Color point ry optional ✕ Color point r intensity optional ✕ Color point gx optional ✕ Color point gy optional ✕ Color point g intensity optional ✕ Color point bx optional ✕ Color point by optional ✕ Color point b intensity optional ✕ Enhanced current hue optional ✓ Enhanced color mode ✕ Color loop active optional ✕ Color loop direction optional ✕ Color loop time optional ✕ Color loop start enhanced hue optional ✕ Color loop stored enhanced hue optional ✓ Color capabilities ✓ Warmest supported temperature ✓ Coolest supported temperature ✓ Couple color temp to level min mireds ✓ Start up color temperature mireds Enabled features: Hue And Saturation XY ColorTemperature
▶ 🌈 Full color (RGB)	v1.1	✓
Color Control What you can do: ✓ Set hue (color) to a specific value ✓ Gradually shift through colors ✓ Step hue ✓ Set color intensity ✓ Move saturation ✓ Step saturation ✓ Set exact color (hue + saturation) ✓ Set color using XY coordinates ✓ Move color ✓ Step color ✓ Move to color temperature ✕ Enhanced move to hue optional ✕ Enhanced move hue optional ✕ Enhanced step hue optional ✕ Enhanced move to hue and saturation optional ✕ Color loop set optional ✓ Stop move step ✓ Move color temperature ✓ Step color temperature Information available: ✓ Current color hue ✓ Current color saturation ✓ Remaining time ✓ Current X color value ✓ Current Y color value ✕ Drift compensation optional ✕ Compensation text optional ✓ Color temperature mireds ✓ Color mode ✓ Options ✓ Number of primaries ✕ Primary1x optional ✕ Primary1y optional ✕ Primary1intensity optional ✕ Primary2x optional ✕ Primary2y optional ✕ Primary2intensity optional ✕ Primary3x optional ✕ Primary3y optional ✕ Primary3intensity optional ✕ Primary4x optional ✕ Primary4y optional ✕ Primary4intensity optional ✕ Primary5x optional ✕ Primary5y optional ✕ Primary5intensity optional ✕ Primary6x optional ✕ Primary6y optional ✕ Primary6intensity optional ✕ White point x optional ✕ White point y optional ✕ Color point rx optional ✕ Color point ry optional ✕ Color point r intensity optional ✕ Color point gx optional ✕ Color point gy optional ✕ Color point g intensity optional ✕ Color point bx optional ✕ Color point by optional ✕ Color point b intensity optional ✕ Enhanced current hue optional ✓ Enhanced color mode ✕ Color loop active optional ✕ Color loop direction optional ✕ Color loop time optional ✕ Color loop start enhanced hue optional ✕ Color loop stored enhanced hue optional ✓ Color capabilities ✓ Color temp physical min mireds ✓ Color temp physical max mireds ✓ Couple color temp to level min mireds ✓ Start up color temperature mireds Enabled features: Hue And Saturation XY ColorTemperature

Automation & Scenes
▶ 👥 Group control	v1.1	✓
Groups What you can do: ✓ Add device to a group ✓ Add device to a group ✓ Check group membership ✓ Check group membership ✓ Get group membership ✓ Get group membership response ✓ Remove device from a group ✓ Remove device from a group ✓ Remove from all groups ✓ Add group if identifying Information available: ✓ Supports named groups Enabled features: GroupNames
▶ 🔗 Device-to-device control	v1.0	✓
Binding Information available: ✓ List of bound devices
🎬 Scenes & presets	v1.3	✕
👁️ Responds to occupancy	v1.1	✕

Info & Monitoring
⚡ Energy monitoring	v1.3	✕

✨ Standout: Device-to-device control, Full color (RGB)

⚠ Not available: Energy monitoring

Technical Details For developers

▼

Device Compatibility

Can provide data to: These devices have client clusters that can read from or control this device's server clusters

Spec Compliance & Feature Analysis

Comparing this device's clusters against Matter specification requirements. Shows what's implemented, what's missing, and bonus features. Note: Legacy clusters (e.g., Scenes) count as compliant when replaced by newer equivalents (Scenes Management).

Extended Color Light Matter 1.0 Compliant

★ ★ ★ ☆ ☆ Feature Score:

60%

Optional Not Implemented 1

Per the Matter spec, these clusters are optional. The device is compliant without them.

Occupancy Sensing (client)

Extra (Beyond Spec) 4

Scenes Descriptor Binding Cluster 0xB08FD01

6/6 required | 0/1 optional

Frequently Paired With Found in 7 installations

These devices are commonly found together in the same smart home setup based on anonymous telemetry data.

Essentials A19-A60 Nanoleaf

4 shared 57.1% of installs

Aqara Hub Aqara

3 shared 42.9% of installs

Aqara Smart Lock U200 Aqara

3 shared 42.9% of installs

tado Smart Radiator Thermostat X tado° GmbH

2 shared 28.6% of installs

Smart Power Strip Meross

2 shared 28.6% of installs

Shelly Plug S MTR Gen3 Shelly

2 shared 28.6% of installs

Smart Plug Mini Meross

2 shared 28.6% of installs

Eve Energy Eve Systems

2 shared 28.6% of installs

Endpoints by Version