Aqara Motion and Light Sensor P2
What This Device Can Do
Sensors| Sensors | ||
|---|---|---|
| 👁️ Occupancy/motion sensor | v1.0 | ✓ |
| ☀️ Light level sensor | v1.0 | ✓ |
| 🌡️ Temperature sensor | v1.0 | ✕ |
| 💧 Humidity sensor | v1.0 | ✕ |
| 🚪 Open/close sensor | v1.0 | ✕ |
| 📊 Pressure sensor | v1.0 | ✕ |
| 🌿 Air quality sensor | v1.2 | ✕ |
| Info & Monitoring | ||
|---|---|---|
| 🔋 Battery status | v1.0 | ✓ |
Setup & Reset Info
▼1. Please make sure you have the Matter-compatible app and Matter-compatible Thread Border Router. 2. Remove the insulating pull tab. The indicator will start breathing. 3. Open the Matter-compatible app and scan the Matter QR Code on the manual or package, or enter the Matter Setup Code printed on the product to add the device to the app. Please note: If the indicator is not breathing, press and hold the reset button for 5 seconds until the LED indicator starts blinking and release it. The device will enter the pairing mode.
Technical Details For developers
▼Spec Compliance & Feature Analysis
Comparing this device's clusters against Matter specification requirements. Shows what's implemented, what's missing, and bonus features. Note: Legacy clusters (e.g., Scenes) count as compliant when replaced by newer equivalents (Scenes Management).
Frequently Paired With Found in 7 installations
These devices are commonly found together in the same smart home setup based on anonymous telemetry data.
Endpoints by Version
Hardware: 1.0.0.0
Endpoint 0
Endpoint 1
Endpoint 2
Endpoint 3
Endpoint 0
Endpoint 1
Endpoint 2
Endpoint 3
Known Versions
| Hardware Version | Software Version | Count | First Seen | Last Seen |
|---|---|---|---|---|
| 1.0.0.0 | 1.0.3.0 | 221 | 2025-11-23 15:55:45 | 2026-01-20 23:48:36 |
| 1.0.0.0 | 1.0.3.1 | 7 | 2026-01-16 22:48:44 | 2026-01-18 19:46:50 |