The Signify Philips Hue Light is a Matter device (Vendor 0x100B, Product 0x0129) with 2 endpoints.

Last updated 26 Sep 2026

Philips Hue Light (PID 0x0129)

★ ★ ★ ☆ ☆ ☆ (75%) Missing required clusters

Signify

Vendor ID: 4107

Product ID: 297

Seen: 2,719 times

No Binding Group control Thread

CSA Certification:

Certified Dec 11, 2024 CSA24757MAT44554-24 v1.126.1

Links: 🔗 Product Page 🛟 Support 📖 Manual

What This Device Can Do

Lighting

★ ★ ★★ ☆ ☆ 56% of features

Controls
▶ 💡 On/Off control	v1.0	✓
On/Off What you can do: ✓ Turn off the device ✓ Turn on the device ✓ Switch between on and off ✓ Turn off with visual effect ✓ On with recall global scene ✓ Turn on for a set duration Information available: ✓ Current power state (on/off) ✓ Global scene control ✓ On time ✓ Off wait time ✓ Power-on behavior setting Enabled features: Lighting
▶ 🔆 Brightness dimming	v1.1	✓
Level Control What you can do: ✓ Set brightness to a specific level ✓ Gradually increase or decrease brightness ✓ Adjust brightness by small increments ✓ Stop ongoing brightness change ✓ Set brightness (turns on if off) ✓ Move with on off ✓ Step with on off ✓ Stop with on off ✕ Move to closest frequency optional Information available: ✓ Current brightness level (0-254) ✓ Remaining time ✓ Minimum supported brightness ✓ Maximum supported brightness ✕ Current frequency optional ✕ Min frequency optional ✕ Max frequency optional ✓ Options ✕ On off transition time optional ✓ On level ✕ On transition time optional ✕ Off transition time optional ✕ Default move rate optional ✓ Start up current level Enabled features: OnOff Lighting
▶ 🎨 Color temperature	v1.1	✓
Color Control What you can do: ✓ Move to hue ✓ Move hue ✓ Step hue ✓ Move to saturation ✓ Move saturation ✓ Step saturation ✓ Move to hue and saturation ✓ Move to color ✓ Move color ✓ Step color ✓ Set color temperature (warm to cool) ✓ Enhanced move to hue ✓ Enhanced move hue ✓ Enhanced step hue ✓ Enhanced move to hue and saturation ✓ Color loop set ✓ Stop move step ✓ Gradually shift color temperature ✓ Adjust temperature by small steps Information available: ✓ Current hue ✓ Current saturation ✓ Remaining time ✓ Current x ✓ Current y ✕ Drift compensation optional ✕ Compensation text optional ✓ Current color temperature ✓ Color mode ✓ Options ✓ Number of primaries ✕ Primary1x optional ✕ Primary1y optional ✕ Primary1intensity optional ✕ Primary2x optional ✕ Primary2y optional ✕ Primary2intensity optional ✕ Primary3x optional ✕ Primary3y optional ✕ Primary3intensity optional ✕ Primary4x optional ✕ Primary4y optional ✕ Primary4intensity optional ✕ Primary5x optional ✕ Primary5y optional ✕ Primary5intensity optional ✕ Primary6x optional ✕ Primary6y optional ✕ Primary6intensity optional ✕ White point x optional ✕ White point y optional ✕ Color point rx optional ✕ Color point ry optional ✕ Color point r intensity optional ✕ Color point gx optional ✕ Color point gy optional ✕ Color point g intensity optional ✕ Color point bx optional ✕ Color point by optional ✕ Color point b intensity optional ✓ Enhanced current hue ✓ Enhanced color mode ✓ Color loop active ✓ Color loop direction ✓ Color loop time ✓ Color loop start enhanced hue ✓ Color loop stored enhanced hue ✓ Color capabilities ✓ Warmest supported temperature ✓ Coolest supported temperature ✓ Couple color temp to level min mireds ✓ Start up color temperature mireds Enabled features: Hue And Saturation EnhancedHue ColorLoop XY ColorTemperature
▶ 🌈 Full color (RGB)	v1.1	✓
Color Control What you can do: ✓ Set hue (color) to a specific value ✓ Gradually shift through colors ✓ Step hue ✓ Set color intensity ✓ Move saturation ✓ Step saturation ✓ Set exact color (hue + saturation) ✓ Set color using XY coordinates ✓ Move color ✓ Step color ✓ Move to color temperature ✓ Enhanced move to hue ✓ Enhanced move hue ✓ Enhanced step hue ✓ Enhanced move to hue and saturation ✓ Color loop set ✓ Stop move step ✓ Move color temperature ✓ Step color temperature Information available: ✓ Current color hue ✓ Current color saturation ✓ Remaining time ✓ Current X color value ✓ Current Y color value ✕ Drift compensation optional ✕ Compensation text optional ✓ Color temperature mireds ✓ Color mode ✓ Options ✓ Number of primaries ✕ Primary1x optional ✕ Primary1y optional ✕ Primary1intensity optional ✕ Primary2x optional ✕ Primary2y optional ✕ Primary2intensity optional ✕ Primary3x optional ✕ Primary3y optional ✕ Primary3intensity optional ✕ Primary4x optional ✕ Primary4y optional ✕ Primary4intensity optional ✕ Primary5x optional ✕ Primary5y optional ✕ Primary5intensity optional ✕ Primary6x optional ✕ Primary6y optional ✕ Primary6intensity optional ✕ White point x optional ✕ White point y optional ✕ Color point rx optional ✕ Color point ry optional ✕ Color point r intensity optional ✕ Color point gx optional ✕ Color point gy optional ✕ Color point g intensity optional ✕ Color point bx optional ✕ Color point by optional ✕ Color point b intensity optional ✓ Enhanced current hue ✓ Enhanced color mode ✓ Color loop active ✓ Color loop direction ✓ Color loop time ✓ Color loop start enhanced hue ✓ Color loop stored enhanced hue ✓ Color capabilities ✓ Color temp physical min mireds ✓ Color temp physical max mireds ✓ Couple color temp to level min mireds ✓ Start up color temperature mireds Enabled features: Hue And Saturation EnhancedHue ColorLoop XY ColorTemperature

Automation & Scenes
▶ 👥 Group control	v1.1	✓
Groups What you can do: ✓ Add device to a group ✓ Add device to a group ✓ Check group membership ✓ Check group membership ✓ Get group membership ✓ Get group membership response ✓ Remove device from a group ✓ Remove device from a group ✓ Remove from all groups ✓ Add group if identifying Information available: ✓ Supports named groups Enabled features: GroupNames
🎬 Scenes & presets	v1.3	✕
🔗 Device-to-device control	v1.0	✕
👁️ Responds to occupancy	v1.1	✕

Info & Monitoring
⚡ Energy monitoring	v1.3	✕

✨ Standout: Full color (RGB)

⚠ Not available: Energy monitoring

Setup & Reset Info

▼

Setup: Power Cycle Reset:

Factory Reset:

1. Open the Hue App. 2. Connect to the light over Bluetooth. 3. Go to light settings and press 'Reset'

Technical Details For developers

▼

Device Compatibility

Can provide data to: These devices have client clusters that can read from or control this device's server clusters

Spec Compliance & Feature Analysis

Comparing this device's clusters against Matter specification requirements. Shows what's implemented, what's missing, and bonus features. Note: Legacy clusters (e.g., Scenes) count as compliant when replaced by newer equivalents (Scenes Management).

Color Temperature Light Matter 1.0 Missing Required

★ ★ ★ ☆ ☆ ☆ Feature Score:

53.3%

Missing Required 1

Scenes Management *

Optional Not Implemented 1

Per the Matter spec, these clusters are optional. The device is compliant without them.

Occupancy Sensing (client)

Extra (Beyond Spec) 1

Descriptor

5/6 required | 0/1 optional

Dimmable Light Matter 1.0 Missing Required

★ ★ ★ ☆ ☆ ☆ Feature Score:

52%

Missing Required 1

Scenes Management *

Optional Not Implemented 1

Per the Matter spec, these clusters are optional. The device is compliant without them.

Occupancy Sensing (client)

Extra (Beyond Spec) 2

Descriptor Color Control

4/5 required | 0/1 optional

On/Off Light Matter 1.0 Missing Required

★ ★ ★ ☆ ☆ ☆ Feature Score:

75%

Missing Required 1

Scenes Management *

Optional Not Implemented 1

Per the Matter spec, these clusters are optional. The device is compliant without them.

Occupancy Sensing (client)

Bonus Features Implemented 1

Level Control

Extra (Beyond Spec) 2

Descriptor Color Control

3/4 required | 1/2 optional

Extended Color Light Matter 1.0 Missing Required

★ ★ ★ ☆ ☆ ☆ Feature Score:

53.3%

Missing Required 1

Scenes Management *

Optional Not Implemented 1

Per the Matter spec, these clusters are optional. The device is compliant without them.

Occupancy Sensing (client)

Extra (Beyond Spec) 1

Descriptor

5/6 required | 0/1 optional

Frequently Paired With Found in 36 installations

These devices are commonly found together in the same smart home setup based on anonymous telemetry data.

BILRESA dual button IKEA of Sweden

16 shared 44.4% of installs

Aqara Smart Lock U200 Aqara

15 shared 41.7% of installs

Eve Motion Eve Systems

12 shared 33.3% of installs

BILRESA scroll wheel IKEA of Sweden

11 shared 30.6% of installs

Essentials A19-A60 Nanoleaf

11 shared 30.6% of installs

GRILLPLATS plug IKEA of Sweden

10 shared 27.8% of installs

KAJPLATS E14 CWS globe 806lm IKEA of Sweden

9 shared 25% of installs

TIMMERFLOTTE temp/hmd sensor IKEA of Sweden

9 shared 25% of installs

Endpoints by Version

Hardware: 0

SW: 1.126.9 Latest Seen 1 endpoint

Endpoint 0

Device Types

Server Clusters (hover for details)✓ Rich data

Client Clusters (hover for details)

Hardware: 1

SW: 1.126.9 Latest Seen 1 endpoint

Endpoint 1

Device Types

Server Clusters (hover for details)✓ Rich data

Known Versions

Hardware Version	Software Version	Count	First Seen	Last Seen
1	1.126.9	2,719	2025-12-19 18:06:01	2026-09-26 00:54:00

« Back to device index

Philips Hue Light (PID 0x0129)

What This Device Can Do

What you can do:

Information available:

Enabled features:

What you can do:

Information available:

Enabled features:

What you can do:

Information available:

Enabled features:

What you can do:

Information available:

Enabled features:

What you can do:

Information available:

Enabled features:

Setup & Reset Info

Technical Details For developers

Device Compatibility

On/Off (32 devices)

Level Control (13 devices)

Color Control (4 devices)

Spec Compliance & Feature Analysis

Frequently Paired With Found in 36 installations

Endpoints by Version

Hardware: 0

Endpoint 0

Descriptor

Access Control

Basic Information

OTA Software Update Requestor

General Commissioning

Network Commissioning

Diagnostic Logs

General Diagnostics

Thread Network Diagnostics

Administrator Commissioning

Operational Credentials

Group Key Management

OTA Software Update Provider

Hardware: 1

Endpoint 1

Identify

Groups

On/Off

Level Control

Descriptor

Color Control

Known Versions