The Leviton Decora Smart Wi-Fi Scene Controller Switch is a Matter device (Vendor 0x109B, Product 0x1007) with 10 endpoints.

Last updated 13 Jun 2026

Decora Smart Wi-Fi Scene Controller Switch

★ ★ ★ ☆ ☆ ☆ (75%) Missing required clusters

Leviton

Vendor ID: 4251

Product ID: 4103

Seen: 12 times

No Binding Wifi

Links: 🔗 Product Page 🛟 Support 📖 Manual

What This Device Can Do

Lighting

★ ★ ★★ ☆ ☆ 33% of features

Controls
▶ 💡 On/Off control	v1.0	✓
On/Off What you can do: ✓ Turn off the device ✓ Turn on the device ✓ Switch between on and off ✓ Turn off with visual effect ✓ On with recall global scene ✓ Turn on for a set duration Information available: ✓ Current power state (on/off) ✓ Global scene control ✓ On time ✓ Off wait time ✓ Power-on behavior setting Enabled features: Lighting
▶ 🔆 Brightness dimming	v1.1	✓
Level Control What you can do: ✓ Set brightness to a specific level ✓ Gradually increase or decrease brightness ✓ Adjust brightness by small increments ✓ Stop ongoing brightness change ✓ Set brightness (turns on if off) ✓ Move with on off ✓ Step with on off ✓ Stop with on off ✕ Move to closest frequency optional Information available: ✓ Current brightness level (0-254) ✓ Remaining time ✓ Minimum supported brightness ✓ Maximum supported brightness ✕ Current frequency optional ✕ Min frequency optional ✕ Max frequency optional ✓ Options ✓ On off transition time ✓ On level ✕ On transition time optional ✕ Off transition time optional ✓ Default move rate ✓ Start up current level Enabled features: OnOff Lighting
🎨 Color temperature	v1.1	✕
🌈 Full color (RGB)	v1.1	✕

Automation & Scenes
▶ 👥 Group control	v1.1	✓
Groups What you can do: ✓ Add device to a group ✓ Add device to a group ✓ Check group membership ✓ Check group membership ✓ Get group membership ✓ Get group membership response ✓ Remove device from a group ✓ Remove device from a group ✓ Remove from all groups ✓ Add group if identifying Information available: ✓ Supports named groups Enabled features: GroupNames
🎬 Scenes & presets	v1.3	✕
🔗 Device-to-device control	v1.0	✕
👁️ Responds to occupancy	v1.1	✕

Info & Monitoring
⚡ Energy monitoring	v1.3	✕

⚠ Not available: Full color (RGB), Energy monitoring

Setup & Reset Info

▼

Setup: Power Cycle Reset: Standard

Technical Details For developers

▼

Device Compatibility

Can provide data to: These devices have client clusters that can read from or control this device's server clusters

On/Off (25 devices)

Matter Thread Dimmer Switch VTM31-SN (Inovelli) Matter Thread On/Off Switch VTM30-SN (Inovelli) YS1606-UC (t0bst4r) Eve Motion (Eve Systems) Matter Thread Fan Switch VTM35-SN (Inovelli) Demo Switch (Demo Vendor) Demo Dimmer (Demo Vendor) Eve Light Switch (Eve Systems) TEST_PRODUCT (t0bst4r) Magic Cube WS01 (Energy Magic Cube) +15 more

Level Control (10 devices)

Matter Thread Dimmer Switch VTM31-SN (Inovelli) Matter Thread On/Off Switch VTM30-SN (Inovelli) Matter Thread Fan Switch VTM35-SN (Inovelli) Demo Dimmer (Demo Vendor) TEST_PRODUCT (t0bst4r) Push Button Module (Insta GmbH) Dimmable Light (EcoDim) IM Pushbutton Module (innovation matters iot GmbH) Touchscreen Switch S100 (Aqara) Matter Light Switch (t0bst4r)

Spec Compliance & Feature Analysis

Comparing this device's clusters against Matter specification requirements. Shows what's implemented, what's missing, and bonus features. Note: Legacy clusters (e.g., Scenes) count as compliant when replaced by newer equivalents (Scenes Management).

On/Off Light Matter 1.0 Missing Required

★ ★ ★ ☆ ☆ ☆ Feature Score:

75%

Missing Required 1

Scenes Management *

Optional Not Implemented 1

Per the Matter spec, these clusters are optional. The device is compliant without them.

Occupancy Sensing (client)

Bonus Features Implemented 1

Level Control

Extra (Beyond Spec) 1

Descriptor

3/4 required | 1/2 optional

Endpoints by Version