The Aqara Aqara Thermostat Hub W200 is a Matter device (Vendor 0x115F, Product 0x4801) with 46 endpoints.

Last updated 31 Jul 2026

Aqara Thermostat Hub W200

★ ★ ★ ★ ★ ☆ (85%)

Aqara

Vendor ID: 4447

Product ID: 18433

Seen: 142 times

Controls devices directly Ethernet Wifi

CSA Certification:

Certified Nov 6, 2025 CSA25D32MAT48260-24 v4.4.6

What This Device Can Do

Climate

★ ★ ★ ★ ★★ 73% of features

Controls
▶ 🌡️ Temperature setpoint	v1.0	✓
Thermostat What you can do: • Raise or lower the target temperature • Raise or lower the target temperature • Set weekly schedule • Get weekly schedule • Add thermostat suggestion response • Clear weekly schedule • Set active schedule request • Set active preset request • Add thermostat suggestion • Remove thermostat suggestion • Atomic response • Atomic request Information available: • Current room temperature • Outdoor temperature • Occupancy • Abs min heat setpoint limit • Abs max heat setpoint limit • Abs min cool setpoint limit • Abs max cool setpoint limit • Pi cooling demand • Pi heating demand • Hvac system type configuration • Local temperature calibration • Target cooling temperature • Target heating temperature • Unoccupied cooling setpoint • Unoccupied heating setpoint • Min heat setpoint limit • Max heat setpoint limit • Min cool setpoint limit • Max cool setpoint limit • Min setpoint dead band • Remote sensing • Control sequence of operation • Current mode (heat/cool/auto/off) • Thermostat running mode • Start of week • Number of weekly transitions • Number of daily transitions • Temperature setpoint hold • Temperature setpoint hold duration • Thermostat programming operation mode • Thermostat running state • Setpoint change source • Setpoint change amount • Setpoint change source timestamp • Occupied setback • Occupied setback min • Occupied setback max • Unoccupied setback • Unoccupied setback min • Unoccupied setback max • Emergency heat delta • Ac type • Ac capacity • Ac refrigerant type • Ac compressor type • Ac error code • Ac louver position • Ac coil temperature • Ac capacityformat • Preset types • Schedule types • Number of presets • Number of schedules • Number of schedule transitions • Number of schedule transition per day • Active preset handle • Active schedule handle • Presets • Schedules • Setpoint hold expiry timestamp • Max thermostat suggestions • Thermostat suggestions • Current thermostat suggestion • Thermostat suggestion not following reason
🌀 Fan speed control	v1.1	✕

Sensors
▶ 🌡️ Temperature sensor	v1.0	✓
Temperature Measurement Information available: ✓ Current temperature reading ✓ Minimum measurable temperature ✓ Maximum measurable temperature ✕ Tolerance optional
▶ 💧 Humidity sensor	v1.0	✓
Relative Humidity Measurement Information available: ✓ Current humidity reading ✓ Minimum measurable humidity ✓ Maximum measurable humidity ✕ Tolerance

Automation & Scenes
▶ ⏰ Scheduling	v1.0	✓
Thermostat What you can do: • Setpoint raise lower • Get weekly schedule response • Set weekly temperature schedule • Get current weekly schedule • Get current weekly schedule • Clear all scheduled settings • Set active schedule request • Set active preset request • Add thermostat suggestion • Remove thermostat suggestion • Atomic response • Atomic request Information available: • Local temperature • Outdoor temperature • Occupancy • Abs min heat setpoint limit • Abs max heat setpoint limit • Abs min cool setpoint limit • Abs max cool setpoint limit • Pi cooling demand • Pi heating demand • Hvac system type configuration • Local temperature calibration • Occupied cooling setpoint • Occupied heating setpoint • Unoccupied cooling setpoint • Unoccupied heating setpoint • Min heat setpoint limit • Max heat setpoint limit • Min cool setpoint limit • Max cool setpoint limit • Min setpoint dead band • Remote sensing • Control sequence of operation • System mode • Thermostat running mode • Max schedule changes per day • Max schedule transitions • Number of daily transitions • Temperature setpoint hold • Temperature setpoint hold duration • Thermostat programming operation mode • Thermostat running state • Setpoint change source • Setpoint change amount • Setpoint change source timestamp • Occupied setback • Occupied setback min • Occupied setback max • Unoccupied setback • Unoccupied setback min • Unoccupied setback max • Emergency heat delta • Ac type • Ac capacity • Ac refrigerant type • Ac compressor type • Ac error code • Ac louver position • Ac coil temperature • Ac capacityformat • Preset types • Schedule types • Number of presets • Number of schedules • Number of schedule transitions • Number of schedule transition per day • Active preset handle • Active schedule handle • Presets • Schedules • Setpoint hold expiry timestamp • Max thermostat suggestions • Thermostat suggestions • Current thermostat suggestion • Thermostat suggestion not following reason
🎬 Scenes & presets	v1.3	✕

Comfort & Climate
▶ 🔥 Heating	v1.0	✓
Thermostat What you can do: • Setpoint raise lower • Get weekly schedule response • Set weekly schedule • Get weekly schedule • Add thermostat suggestion response • Clear weekly schedule • Set active schedule request • Set active preset request • Add thermostat suggestion • Remove thermostat suggestion • Atomic response • Atomic request Information available: • Current room temperature • Outdoor temperature • Occupancy • Abs min heat setpoint limit • Abs max heat setpoint limit • Abs min cool setpoint limit • Abs max cool setpoint limit • Pi cooling demand • Pi heating demand • Hvac system type configuration • Local temperature calibration • Occupied cooling setpoint • Target heating temperature • Unoccupied cooling setpoint • Unoccupied heating setpoint • Min heat setpoint limit • Max heat setpoint limit • Min cool setpoint limit • Max cool setpoint limit • Min setpoint dead band • Remote sensing • Control sequence of operation • System mode • Thermostat running mode • Start of week • Number of weekly transitions • Number of daily transitions • Temperature setpoint hold • Temperature setpoint hold duration • Thermostat programming operation mode • Thermostat running state • Setpoint change source • Setpoint change amount • Setpoint change source timestamp • Occupied setback • Occupied setback min • Occupied setback max • Unoccupied setback • Unoccupied setback min • Unoccupied setback max • Emergency heat delta • Ac type • Ac capacity • Ac refrigerant type • Ac compressor type • Ac error code • Ac louver position • Ac coil temperature • Ac capacityformat • Preset types • Schedule types • Number of presets • Number of schedules • Number of schedule transitions • Number of schedule transition per day • Active preset handle • Active schedule handle • Presets • Schedules • Setpoint hold expiry timestamp • Max thermostat suggestions • Thermostat suggestions • Current thermostat suggestion • Thermostat suggestion not following reason
▶ ❄️ Cooling	v1.0	✓
Thermostat What you can do: • Setpoint raise lower • Get weekly schedule response • Set weekly schedule • Get weekly schedule • Add thermostat suggestion response • Clear weekly schedule • Set active schedule request • Set active preset request • Add thermostat suggestion • Remove thermostat suggestion • Atomic response • Atomic request Information available: • Current room temperature • Outdoor temperature • Occupancy • Abs min heat setpoint limit • Abs max heat setpoint limit • Abs min cool setpoint limit • Abs max cool setpoint limit • Pi cooling demand • Pi heating demand • Hvac system type configuration • Local temperature calibration • Target cooling temperature • Occupied heating setpoint • Unoccupied cooling setpoint • Unoccupied heating setpoint • Min heat setpoint limit • Max heat setpoint limit • Min cool setpoint limit • Max cool setpoint limit • Min setpoint dead band • Remote sensing • Control sequence of operation • System mode • Thermostat running mode • Start of week • Number of weekly transitions • Number of daily transitions • Temperature setpoint hold • Temperature setpoint hold duration • Thermostat programming operation mode • Thermostat running state • Setpoint change source • Setpoint change amount • Setpoint change source timestamp • Occupied setback • Occupied setback min • Occupied setback max • Unoccupied setback • Unoccupied setback min • Unoccupied setback max • Emergency heat delta • Ac type • Ac capacity • Ac refrigerant type • Ac compressor type • Ac error code • Ac louver position • Ac coil temperature • Ac capacityformat • Preset types • Schedule types • Number of presets • Number of schedules • Number of schedule transitions • Number of schedule transition per day • Active preset handle • Active schedule handle • Presets • Schedules • Setpoint hold expiry timestamp • Max thermostat suggestions • Thermostat suggestions • Current thermostat suggestion • Thermostat suggestion not following reason
▶ 🔄 Auto heat/cool	v1.0	✓
Thermostat What you can do: • Setpoint raise lower • Get weekly schedule response • Set weekly schedule • Get weekly schedule • Add thermostat suggestion response • Clear weekly schedule • Set active schedule request • Set active preset request • Add thermostat suggestion • Remove thermostat suggestion • Atomic response • Atomic request Information available: • Local temperature • Outdoor temperature • Occupancy • Abs min heat setpoint limit • Abs max heat setpoint limit • Abs min cool setpoint limit • Abs max cool setpoint limit • Pi cooling demand • Pi heating demand • Hvac system type configuration • Local temperature calibration • Occupied cooling setpoint • Occupied heating setpoint • Unoccupied cooling setpoint • Unoccupied heating setpoint • Min heat setpoint limit • Max heat setpoint limit • Min cool setpoint limit • Max cool setpoint limit • Min setpoint dead band • Remote sensing • Control sequence of operation • Current system mode • Currently heating or cooling • Start of week • Number of weekly transitions • Number of daily transitions • Temperature setpoint hold • Temperature setpoint hold duration • Thermostat programming operation mode • Thermostat running state • Setpoint change source • Setpoint change amount • Setpoint change source timestamp • Occupied setback • Occupied setback min • Occupied setback max • Unoccupied setback • Unoccupied setback min • Unoccupied setback max • Emergency heat delta • Ac type • Ac capacity • Ac refrigerant type • Ac compressor type • Ac error code • Ac louver position • Ac coil temperature • Ac capacityformat • Preset types • Schedule types • Number of presets • Number of schedules • Number of schedule transitions • Number of schedule transition per day • Active preset handle • Active schedule handle • Presets • Schedules • Setpoint hold expiry timestamp • Max thermostat suggestions • Thermostat suggestions • Current thermostat suggestion • Thermostat suggestion not following reason
▶ 📌 Temperature presets	v1.0	✓
Thermostat What you can do: • Setpoint raise lower • Get weekly schedule response • Set weekly schedule • Get weekly schedule • Add thermostat suggestion response • Clear weekly schedule • Set active schedule request • Set active preset request • Add thermostat suggestion • Remove thermostat suggestion • Atomic response • Atomic request Information available: • Local temperature • Outdoor temperature • Occupancy • Abs min heat setpoint limit • Abs max heat setpoint limit • Abs min cool setpoint limit • Abs max cool setpoint limit • Pi cooling demand • Pi heating demand • Hvac system type configuration • Local temperature calibration • Occupied cooling setpoint • Occupied heating setpoint • Unoccupied cooling setpoint • Unoccupied heating setpoint • Min heat setpoint limit • Max heat setpoint limit • Min cool setpoint limit • Max cool setpoint limit • Min setpoint dead band • Remote sensing • Control sequence of operation • System mode • Thermostat running mode • Start of week • Number of weekly transitions • Number of daily transitions • Temperature setpoint hold • Temperature setpoint hold duration • Thermostat programming operation mode • Thermostat running state • Setpoint change source • Setpoint change amount • Setpoint change source timestamp • Occupied setback • Occupied setback min • Occupied setback max • Unoccupied setback • Unoccupied setback min • Unoccupied setback max • Emergency heat delta • Ac type • Ac capacity • Ac refrigerant type • Ac compressor type • Ac error code • Ac louver position • Ac coil temperature • Ac capacityformat • Preset types • Schedule types • Number of presets • Number of schedules • Number of schedule transitions • Number of schedule transition per day • Active preset handle • Active schedule handle • Available temperature presets • Currently active preset • Setpoint hold expiry timestamp • Max thermostat suggestions • Thermostat suggestions • Current thermostat suggestion • Thermostat suggestion not following reason
💧 Humidity control	v1.1	✕

✨ Standout: Scheduling

Technical Details For developers

▼

Device Compatibility

Can provide data to: These devices have client clusters that can read from or control this device's server clusters

Thermostat (3 devices)

Aqara Climate Sensor W100 (Aqara) Eve Thermo Control (Eve Systems) Touchscreen Switch S100 (Aqara)

Relative Humidity Measurement (1 device)

Touchscreen Switch S100 (Aqara)

Occupancy Sensing (1 device)

Touchscreen Switch S100 (Aqara)

Temperature Measurement (4 devices)

Eve Thermo (Eve Systems) Eve Thermo (Eve Systems) Touchscreen Switch S100 (Aqara) Matter Thermostat (Matic Robots, Inc)

Illuminance Measurement (1 device)

Touchscreen Switch S100 (Aqara)

Spec Compliance & Feature Analysis

Comparing this device's clusters against Matter specification requirements. Shows what's implemented, what's missing, and bonus features. Note: Legacy clusters (e.g., Scenes) count as compliant when replaced by newer equivalents (Scenes Management).

Thermostat Matter 1.0 Compliant

★ ★ ★ ☆ ☆ ☆ Feature Score:

50%

Optional Not Implemented 7

Per the Matter spec, these clusters are optional. The device is compliant without them.

Groups Thermostat User Interface Configuration Energy Preference Fan Control (client) Temperature Measurement (client) Relative Humidity Measurement (client) Occupancy Sensing (client)

Extra (Beyond Spec) 5

Descriptor Binding Relative Humidity Measurement Cluster 0x1349FC05 Cluster 0x1349FC06 (client)

2/2 required | 0/7 optional

Occupancy Sensor Matter 1.0 Compliant

★ ★ ★ ★ ★ ☆ Feature Score:

85%

Bonus Features Implemented 1

Boolean State Configuration

Extra (Beyond Spec) 1

Descriptor

2/2 required | 1/1 optional

Temperature Sensor Matter 1.0 Compliant

★ ★ ★ ☆ ☆ Feature Score:

60%

Extra (Beyond Spec) 1

Descriptor

2/2 required | 0/0 optional

Humidity Sensor Matter 1.0 Compliant

★ ★ ★ ☆ ☆ Feature Score:

60%

Extra (Beyond Spec) 1

Descriptor

2/2 required | 0/0 optional

Light Sensor Matter 1.0 Compliant

★ ★ ★ ☆ ☆ Feature Score:

60%

Extra (Beyond Spec) 1

Descriptor

2/2 required | 0/0 optional

Frequently Paired With Found in 7 installations

These devices are commonly found together in the same smart home setup based on anonymous telemetry data.

Matter Thread Dimmer Switch VTM31-SN Inovelli

4 shared 57.1% of installs

Aqara Smart Lock U400 Aqara

4 shared 57.1% of installs

Aqara Hub Aqara

4 shared 57.1% of installs

Essentials A19-A60 Nanoleaf

4 shared 57.1% of installs

Smart Outdoor Plug-In Dimmer Tapo

3 shared 42.9% of installs

Eve Energy Eve Systems

3 shared 42.9% of installs

BILRESA dual button IKEA of Sweden

3 shared 42.9% of installs

Essentials Downlight Nanoleaf

3 shared 42.9% of installs

Endpoints by Version

Hardware: 1.0.0.0

SW: 4.5.49 Latest Seen 15 endpoints